2024 Exmark Lazer Z Diesel LZS86TDYM12RW0

Information

2024 Exmark Lazer Z Diesel LZS86TDYM12RW0

When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.

Features may include:
  • Improved Handling
  • Fuel Capacity
  • Tire Size / Ground Speed
  • On-Board Intelligence
  • Reduced Maintenance and Service
  • Hydraulic Deck Lift
  • Productivity
  • Leading Zero-Turn. Strong Warranty.

Photos

Highlights

  • Wainfleet, Ontario
  • 2024
  • Exmark
  • Lazer Z Diesel LZS86TDYM12RW0
  • Diesel
  • Available
  • 144.9 in. (368cm), 84 in. (213cm) @ 3 in. HOC when folded
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 72.6 in. (184.3 cm)

Specifications

  • 2024
  • Exmark
  • Lazer Z Diesel
  • LZS86TDYM12RW0
  • Zero-Turn Mower
  • Yanmar 3TNV86CT
  • 1568 cc
  • Series: TNV
  • 3,000 RPM
  • Heavy-duty canister air filtration system with electronic vacuum sensor
  • 43.5 HP
  • Electronically Governed IDI Turbo Diesel | Indicator: Mechanical float type
  • Diesel
  • Engagement: Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
  • Hydro-Drive | Description: Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
  • Control: Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
  • Lever-actuated internal wet disc brake.
  • 26x12-12, 6ply Multi Trac® | Caster: 15 x 6.0-6, smooth-tread, semi-pneumatic.
  • 26x12-12, 6ply Multi Trac®
  • 12-volt battery with 55-amp alternator.
  • Forward: 0–11.0 mph (18 kmph) | Reverse: 0–6 mph (10 kmph)
  • Blade: Approximately 17,900 fpm
  • Tractor: Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters: .50"
  • Cutter Housing: 7.75" | Shaft: 25mm (.98")
  • Deck: 144"
  • 144.9 in. (368cm), 84 in. (213cm) @ 3 in. HOC when folded
  • Blades: 6 Blades at 24.50" | 101.3 in. (257.3 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 72.6 in. (184.3 cm)
  • 12-gallon (45.4-L)
  • Curb: 3250
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Style: Floating Deck | Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch. | 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.